Branson

 
2200 watt  

Branson 2000 aed 2200 watt ultrasonic welding system (sold)

2200 watt, 20 kHz, 3.0 intelligent actuator, weld by distance, RF cables, base with palm buttons, new 1999, excellent (also 1100 watt Branson 2000d/2000aed system)

 
 

Branson 2000aed 1100 watt ultrasonic plastic welding system

1100 watt 20 kHz 2000d power supply, s/n – WFH99110656 3.0 aed intelligent actuator, s/n – WAT3017528B 1.5″ press cylinder, weld by distance, factory stand, palm buttons, tested under power, 1999

 
3300 watt  

Branson 2000aed/2000 dt ultrasonic welding system

3300 watt, 20 kHz, intelligent ultrasonic welder, one of three late model 3300 watt ultrasonic welders arriving soon, along with (7) other 750-2000 watt ultrasonic systems

 
2300 watt  

Branson 2000iw ultrasonic welder, s/n – WLD04060532

2300 watt, 20 kHz, integrated power supply, factory base with palm buttons & e-stops, light curtain & controller, converter & booster, new 2004, video under power

 
286#  

Branson 2913-L vibration welder, s/n – 00D400691

80-120 Hz, 104″ x 27.5″ lift table, 31 kVA drive, 54″ x 15″ vibration unit, 286# upper tool weight, AB SLC5/04 PLC, 10″ touch screen, 2000, 579,000 cycles, very clean

 
286#  

Branson 2913-L vibration welder, s/n – 00D415011

80-120 Hz, 104″ x 27.5″ lift table, 31 kVA drive, 54″ x 15″ vibration unit, 286# upper tool weight, AB SLC5/04 PLC, 10.5″ touch screen, 2000, 243,000 cycles, excellent

 
286#  

Branson 2913-L vibration welder, s/n – 00D423484 (sold)

80-120 Hz, 104″ x 27.5″ lift table, 31 kVA drive, 54″ x 15″ vibration unit, 198# upper tool weight, AB SLC5/04 PLC, 10″ touch screen, 2000, 327,000 cycles

 
286#  

Branson 2913-L vibration welder, s/n – 01D447442

78″ x 26″ lift table, 55″ x 14″ vibration unit, 286# upper tool weight, 31 kVA drive, touch screen, 301,000 cycles, rebuilt by Branson in 2001

 
198#  

Branson 2913-UHL vibration welder (sold)

84″ x 27″ hydraulic lift table (rack & pinion), 100 Hz, 22 KW vibration drive, Allen Bradley PLC/interface, 2002

 
1000 watt  

Branson 910IW ultrasonic welder, s/n – YE30084C

20 kHz, integrated power supply, factory stand, palm buttons & emergency stop, tested under power, extremely clean, 1999*

 
1000 watt  

Branson 910IW+ ultrasonic welder, s/n – YH99010251G (sold)

20 kHz, integrated power supply, weld by distance (linear encoder), hub mount (no base), tested under power, very clean,1999*

 
 

Branson DVW-2L vibration welder, s/n – 05R591963

20″ x 15″ part capacity, 180-240 Hz, Vectron 17 hp digital power supply, hydraulic lift table, front/rear service doors, Siemens S7-200 PLC, 2005 – appears unused

 
1000 watt  

Branson FS-90 fabric welding system (sold)

fabric welding system (seam welder), 20″ throat, 20 kHz, 910BC power supply,
902R converter & booster, 26″ x 48″ table, 117/1/60

 
48" x 60"  

Branson HH-4840 hot plate (pallet) welder, 07R654547-2

48W” x 62D” x 34″H capacity, 400F-600F aluminum hot plate, servo driven tables, hydraulic press, AB Compactlogix PLC & Panelview 700 HMI, 2007 (4)

 
48" x 60"  

Branson HH-4840 hot plate (pallet) welder, horizontal, 07R654547-1

48W” x 62D” x 34″H horizontal hot plate welder, 400F-600F aluminum hot plate, hydraulic, Compactlogix PLC & Panelview 700 HMI, just arrived, 2007 – 2008 (5)

 
 

Branson HV-12 hot plate welder (sold) – 4

10″ x 12″ part size 12″ x 15″ platens 14″ heated platen stroke Allen Bradley SLC500 PLC Quickpanel Jr. touch screen interface 480/3/60 new 2001 (4)

 
unknown  

Branson LV-38 vibration welder, s/n – 94RLV380084

38” x 19” lift table, Moog valve (hydronamic drive), new 1994, Allen Bradley controls, rebuilt 2003

 
77# - 143#  

Branson M-624L vibration welder (sold)

52” x 21” lift table, 45 hp Vectron drive, Branson center drive coils, M2 software, 73 cycles total use, 2006

 
8#  

Branson Mini-I vibration welder, s/n – VMW93000002A

13.7” x 9.5” lift table, 5 hp vibration drive, Allen Bradley Series 90 control, manual tuning, very good condition, 1993

 
8#  

Branson Mini-I vibration welder, s/n – VMW93000006A

13.7” x 9.5” lift table, 5 hp vibration drive, Allen Bradley TCAT interface, manual tuning, from laboratory, mint condition, 1993

 
8#  

Branson Mini-II vibration welder (sold) – 3

13.75″ x 9.5″ lift table (pnuematic), 180-240 Hz, 8# upper tool, 11 KW vibration drive, various PLC & interface, 1997 – 2002 (3)

 
8#  

Branson Mini-II vibration welder, s/n – 05R566720 (sold)

13.75″ x 9.5″ lift table, 17 hp/12.7 KW Vectron frequency inverter, 8# upper tool weight, Allen Bradley SLC500 PLC, Quickpanel Jr interface, like new condition, 2005

 
8#  

Branson Mini-II vibration welder, s/n – 07R656608-1

8# upper tool weight, 7″ x 9″ part capacity, 17 hp frequency inverter, Micrologix PLC, Panelview 600 interface, new 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656610-1

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 380 to 460 transformer, 2186 cycles, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656610-2

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 445,797 cycles, very clean, see video, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656610-3

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, only 427 cycles, like new, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656801-1

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 211,082 cycles, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656801-3

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 19,847 cycles, excellent, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656801-4

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 2102 cycles, like new, 2007

 
8#  

Branson Mini-II vibration welder, s/n – 07R656801-5

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, only 1920 cycles, 2007, (6) identical

 
8#  

Branson Mini-II vibration welder, s/n – 07R656801-6

8# upper tool weight, 7″ x 9″ part size, 17 hp frequency inverter, Micrologix PLC, Panelview 600 touch screen, weld by distance, like new, 2042 cycles, 2007

 
250 watt  

Branson Radiance 3G laser, s/n –

(2) 125 watt laser banks, upper tool with (8) fiber optic bundles, control, 2000X actuator, welds up to 4 lineal inches

 
2" diameter  

Branson SW-150 spin welder, s/n – EDP-300-101-109

air powered spindle to 7500 rpm (programmable), 2″ diameter part capacity, 4″ ram stroke, 14″ open height, 8″ height adjustment, bench mount, palm buttons & e-stop, non orienting, like new, 2008

 
2 hp  

Branson SW-200 spin welder (servo driven, orienting)

Apex 2 hp servo drive, 3500 rpm, 3.4″ stroke, 18″ height adjustment, weld by rotation, distance (collapse) or absolute position, very clean, 2005

 
2 hp  

Branson SW-200 spin welder (sold)

2 hp Apex servo drive with orientation 3.4″ actuator stroke, 18″ height adjustment, factory table with palm buttons, Eason 900X interface for rpm/rpc, 1996 (Powell McGee)

 
 

Branson SW-200 spin welder (sold)

2 hp Apex servo drive, 3.4″ stroke, 18″ height adjustment, weld by rotation (1 degree), distance (collapse) or absolute position, light pharmaceutical use, 2000

 
2 hp  

Branson SW-200 spin welder, s/n – 200CR0308681

(2) Apex 6154 – 2 hp servo drives, orientation to 1 degree, motor has grounding issue, 3.5″ stroke, 18″ open height, 315# maximum force, Eason 900X interface, 2003

 
6.8 hp  

Branson SW-300 spin welder (sold)

6.8 hp servo drive, 250 – 3500 rpm, weld by rotation, collapse or absolute position, 5″ to 32″ spindle to base, 225# force, 6″ color touch screen, 2008, 5629 total cycles

 
50#  

Branson VW-4 vibration welder, s/n – 95R259214-1

50# upper tool weight, 34″ x 21″ motorized lift table, 23.5 kVA Branson Ultraschall vibration drive, Allen Bradley SLC5/02 PLC & DTAM Plus interface, 1995

 
50#  

Branson VW-4 vibration welder, s/n – 96R-291194

50# upper tool weight, 34″ x 21″ motorized lift table, Commander 5 hp frequency inverter, Allen Bradley SLC5/02 PLC & DTAM Plus interface, 1996

 
50#  

Branson VW-4H Ultra Hy-Line vibration welder, 98R342349

50# upper tool weight, 34″ x 21″ hydraulic lift table, 10 hp frequency inverter, Allen Bradley SLC5/04 PLC, Xycom 9487 interface, weld by distance, 1998 – SOLD

 
35#  

Branson VW-4H vibration welder (sold)

34″ x 21″ lift table, 180-240 Hz, 35# – 50# upper tool, 10 hp vibration drive, Versalogic PLC, Epic interface, 1997

 
35# - 50#  

Branson VW-4H vibration welder, s/n – 01R472163 (sold)

Hy-Line, 34″ x 21″ hydraulic lift table, 50# upper tool weight, Vectron 17 hp vibration drive, weld by distance, GE Versalogic control, Epic inteface, very clean, appears almost new, 2001

 
35#  

Branson VW-4L vibration welder (sold)

33″ x 21″ lift table, 180-240 Hz, 35# – 50# upper tool weight, 17 hp vibration drive, Alley Bradley SLC 5/05 PLC, 2003

 
45# - 80#  

Branson VW-6 (96DVW6) linear vibration welder (sold)

46″ x 21″ lift table (motorized), 40″ x 18″ vibration unit, 10 hp power supply, Allen Bradley SLC5/04 PLC & Panelview 1000, 1996

 
80#  

Branson VW-6 vibration welder (24V control retrofit)

46″ x 21″ hydraulic lift table, 25″ daylight, 15 hp weld head, 25 KW Emerson SK3401 vibration drive, Compactlogix L32E & Panelview 700+ HMI, warranty – SOLD

 
45# - 80#  

Branson VW-6 vibration welder (complete rebuild) (sold)

46” x 21” lift table, 80# upper tool weight, 15 hp head, 2012 complete rebuild (AB Compulogix L32E PLC, Panelview Plus 700 interface, 25 hp Emerson frequency inverter), parts & labor warranty

 
80#  

Branson VW-6 vibration welder, s/n – 96R259934

80# upper tool weight, 46″ x 21″ lift table, (hydraulic), 15 hp weld head, 23.4 hp frequency inverter, DTAM interface, Versalogic control, finger actuators, 1996, very clean

 
45#  

Branson VW-6H vibration welder (sold)

46″ x 21″ lift table, 180-240 Hz, 45# – 80# upper tool, 10 hp vibration drive, Versalogic PLC, Epic interface, 1997

 
45# - 80#  

Branson VW-6UH Ultra Hy-Line vibration welder (sold)

46″ x 21″ hydraulic, 15 hp Commander vibration drive, Allen Bradley SLC5/04 PLC, Xycom touch screen interface, weld by distance, excellent, 1998

 
 

Branson VW-6UHL linear vibration welder, 1999 (sold)

46″ x 21″ lift table with 12″ x 32″ opening 40″ x 18″ vibration unit 25″ vertical clearance 45# upper tool weight (recommended), 80# maximum 20″ table stroke (hydraulic – [...]

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 12″ x 32″ open
17hp Vectron drive,
Allen Bradley & Xycom controls,
45# – 80# upper tool weight, 1994

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 10 hp Commander drive, Allen Bradley & Xycom controls, 45# – 80# upper tool weight, 1995

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 10 hp Commander drive, weld by distance, 45# – 80# upper tool weight, excellent, 1996

 
80#  

Branson VW-6UHL vibration welder, s/n – 01R445792 (sold)

46″ x 21″ hydraulic lift table, 80# upper tool weight, 15 hp head, 23.4 hp vibration drive, AB SLC5/04 PLC & AB computer, touch screen, from medical clean room, exc., 2001

 
120#  

Branson VW-8-H2 vibration welder, s/n – 06R613246 (sold)

120# upper tool weight, 58″ x 18″ part capacity, 21″ lift table stroke, Vectron 23.4 hp frequency inverter, weld by distance, AB Compulogix L32 PLC, Panelview Plus 700 interface, H2 software, 2006

 
35# - 50#  

Branson VW90-4 linear vibration welder (sold)

34″ x 21″ motorized lift table
7.5 hp vibration drive, 35# – 50#
tool weight, weld by distance
AB SLC5/02 & Spectrum SOI
new 1992, clean

 
35#  

Branson VW90-4 vibration welder (sold) – 6

34″ x 21″ lift table (mechanical), 180-240 Hz, 35# – 50# upper tool, 5-10 hp Commander drive, DTAM interface, 1992 (6)

 
 

Branson VW90-6 (VW-6) driver coil (sold)

Marelco Power Systems 144-100-106 driver coil 100C, 1 phase for 15 hp Branson head s/n – M-17881

 
45# - 80#  

Branson VW90-6 vibration welder (sold) – 3

46″ x 21″ lift table (mechanical), 180-240 Hz, 45# – 80# upper tool, 7.5 – 10 hp Commander drive, Series 90, 1992 (3)

 
45# - 80#  

Branson VW90-6 vibration welder, s/n – 415983 (sold)

46” x 21” lift table, 23.4 hp Vectron drive, 15 hp head, motorized table elevation, Series 90 control, new in 2000

 
45#  

Branson VW90-6 vibration welder, s/n – 415983-2 (sold)

18–240 Hz, 46″ x 21″ lift table (motorized), 23 hp Vectron drive, 15 hp head, Series 90 controls, weld by distance, lightly used, excellent condition, new 2000

 
10 hp  

Branson VW90-6 weld head

10 hp springs & drive coils from 1992 Branson VW90-6 with 7-1/2 hp Emerson Laser frequency inverter (pictured)

 
15 hp  

drive coils (new) – for Branson VW-6 vibration welder

Branson VW-6 15 hp driver coils (single & double coil)

 
unkown  

Vinton (Branson) LVW-7SA vibration welder

38” x 19” lift table, Moog valve (hydronamic drive), new 1993, Allen Bradley SLC5/04 PLC & Panelview 1000 interface, complete rebuild in 2001, stored since 2008

 
unknown  

Vinton LVW-7B vibration welder (sold)

36” x 16” pneumatic lift table, Moog valve (hydronamic drive), new 1992, Allen Bradley SLC150, digital weld control