Sold (previous inventory)

These machines are no longer in stock. We can notify you immediately if any of these machines become available. Let us know if you have current or future needs for similar machines (as our inventory changes), or if you have any for sale.

 
132# upper tool  

Bielomatik LVW-5422 vibration welder, s/n – 02-05-30

54” x 22” lift table, 35 KW Lenze drive, Allen Bradley controls, 250,000 cycles, front/rear operator access, 2002

 
63 amp  

Bielomatik K-2250 hot plate welder, s/n – K2250/150

72” x 29” fixed lower platen
63” x 22” press platen (hydraulic)
50” x 22” rotating hot plate carrier
Siemens S7-300 PLC & OP27
new 2002, CE stamped

 
192#  

Bielomatik K-3216/29 250 Hz vibration welder (Germany)

90 kg upper tool weight, 24.8 kN weld force, 1320 x 540 mm lift table, 1220 x 530 mm vibrating head, 770 mm daylight, Siemens S7-300 PLC & HMI, new 2004

 
198#  

Bielomatik K-3219 vibration welder

63” x 24” hydraulic lift table, 170-260 Hz, 90 Kg upper tool, 65 KW vibration drive, Siemens S7-300 PLC, 2006

 
192#  

Bielomatik K-3219 vibration welder, s/n – K-3219/16

90 kg upper tool weight, 65 KW vibration drive, 64″ x 24″ hydraulic lift table, 51″ x 24″ vibration unit, 170-260 Hz frequency, Siemens S7-300 PLC & OP270 interface, CE stamped, 2006 (2)

 
192#  

Bielomatik K-3219 vibration welder, s/n – K-3219/17

90 kg upper tool weight, 65 KW vibration drive, 64″ x 24″ hydraulic lift table, 51″ x 24″ vibration unit, Siemens S7-300 PLC & OP270 HMI, CE stamped, 2006

 
396#  

Bielomatik K-3220 vibration welder (sold)

74.8″ x 31.5″ lift table (rack & pinion), 90-130 Hz, 180 kg upper tool weight, 35 KW vibration drive, Allen Bradley SLC5/04 PLC & Panelview 1000 interface, 2002

 
132#  

Bielomatik LVW-4822 linear vibration welder, 02-09-54

54″ x 22″ hydraulic lift table, 28.5″ vertical clearance, 35 KW vibration drive, Allen Bradley SLC5/05 PLC, Panelview 1000, PLC, amplitude sensor missing, 2002

 
132#  

Bielomatik LVW-4822 linear vibration welder, 02-09-55

54″ x 22″ lift table, 28.5″ vertical, 25 kN weld force, 85 sq inch weld plane, 35 KW drive, 132# upper tool, AB SLC5/05 PLC, Panelview 1000, light use, 2002 – SOLD

 
132#  

Bielomatik LVW-4822 linear vibration welder, 03-07-33

132# upper tool weight, 54″ x 22″ hydraulic lift table, 28.5″ daylight, 35 KW vibration drive, laser measurement, AB SLC5/05 PLC & Panelview 1000, 2003, excellent

 
132#  

Bielomatik LVW-4822 linear vibration welder, 04-05-14

132# upper tool weight, 54″ x 22″ lift table, 28.5″ vertical, 35 KW vibration drive, 25 kN weld force, AB SLC5/05 PLC, Panelview 1000, laser measurement, 2004, like new

 
35 KW  

Bielomatik LVW-4822 linear vibration welder, 04-05-15

132# upper tool weight, 54″ x 22″ hydraulic lift table, 28.5″ vertical, 35 KW vibration drive, AB SLC5/05 PLC, Panelview 1000, ethernet, very few cycles, 2004, excellent

 
132#  

Bielomatik LVW-4822 vibration welder, s/n – 02-05-26

54” x 22” lift table, 35 KW Lenze drive, Allen Bradley controls, 250,000 cycles, 2002

 
132#  

Bielomatik LVW-4822 vibration welder, s/n 02-09-53 (sold)

54″ x 22″ hydraulic lift table, 28.5″ vertical clearance, 35 KW vibration drive, 132# upper tool weight, Allen Bradley SLC5/05 PLC, Panelview 1000, like new – 29 cycles

 
132#  

Bielomatik LVW-5422 vibration welder, s/n – 02-05-28

54” x 22” lift table, 35 KW Lenze drive, Allen Bradley controls, 250,000 cycles, front/rear operator access, 2002

 
35 KW  

Bielomatik LVW-5422 vibration welder, s/n – 02-05-30

54″ x 22″ hydraulic lift table, 35 KW Lenze vibration drive, front & rear operator access, Allen Bradley SLC5/04 PLC & Panelview 550 interface, 272,000 cycles, very clean, 2002

 
1100 watt  

Branson 1100 watt ultrasonic welder, 20 kHz, 2000iw model

integrated ultrasonic welder, very light use making OEM part, factory base, finger actuators & e-stop, dynamic triggering, converter & boosters, new 2012

 
2200 watt  

Branson 2000 aed 2200 watt ultrasonic welding system (sold)

2200 watt, 20 kHz, 3.0 intelligent actuator, weld by distance, RF cables, base with palm buttons, new 1999, excellent (also 1100 watt Branson 2000d/2000aed system)

 
 

Branson 2000aed 1100 watt ultrasonic plastic welding system

1100 watt 20 kHz 2000d power supply, s/n – WFH99110656 3.0 aed intelligent actuator, s/n – WAT3017528B 1.5″ press cylinder, weld by distance, factory stand, palm buttons, tested under power, 1999

 
2300 watt  

Branson 2000iw ultrasonic welder, s/n – WLD04060532

2300 watt, 20 kHz, integrated power supply, factory base with palm buttons & e-stops, light curtain & controller, converter & booster, new 2004, video under power

 
750 watt  

Branson 2000X actuator & 750W power supply, 30 kHz, 2012 (1 of 2)

2000X 2.0 actuator & 2000X 30:0.75 power supply, 750 watt, 30 kHz, unused in boxes, new 2012 (2)

 
750 watt  

Branson 2000X actuator & 750W power supply, 30 kHz, 2012 (2 of 2)

2000X 2.0AE actuator & 2000X 30:0.75 power supply, 750 watt, 30 kHz, unused, new 2012 (2)

 
286#  

Branson 2913-L vibration welder, s/n – 00D400691

80-120 Hz, 104″ x 27.5″ lift table, 31 kVA drive, 54″ x 15″ vibration unit, 286# upper tool weight, AB SLC5/04 PLC, 10″ touch screen, 2000, 579,000 cycles, very clean

 
286#  

Branson 2913-L vibration welder, s/n – 00D423484 (sold)

80-120 Hz, 104″ x 27.5″ lift table, 31 kVA drive, 54″ x 15″ vibration unit, 198# upper tool weight, AB SLC5/04 PLC, 10″ touch screen, 2000, 327,000 cycles

 
286#  

Branson 2913-L vibration welder, s/n – 01D447442

78″ x 26″ lift table, 55″ x 14″ vibration unit, 286# upper tool weight, 50 – 450 cm2 weld plane, 31 kVA drive, 301,000 cycles, rebuilt by Branson in 2001

 
198#  

Branson 2913-UHL vibration welder (sold)

84″ x 27″ hydraulic lift table (rack & pinion), 100 Hz, 22 KW vibration drive, Allen Bradley PLC/interface, 2002

 
1000 watt  

Branson 910IW ultrasonic welder, 20 kHz, s/n – YE30084C

20 kHz, integrated power supply, factory stand, palm buttons & emergency stop, tested under power, extremely clean, 1999*

 
1000 watt  

Branson 910IW+ ultrasonic welder, s/n – YH99010251G (sold)

20 kHz, integrated power supply, weld by distance (linear encoder), hub mount (no base), tested under power, very clean,1999*

 
3000 watt  

Branson 915 aesj/930MAs ultrasonic welder, 3000 watt

15 kHz, 915 aesj actuator, 930MAs power supply, weld by distance, factory base with palm buttons & e-stop, sound enclosure, SAM box, video under power, 1999

 
2000 watt  

Branson 920IW+ ultrasonic welder, YJ01041562G

2000 watt, 20 kHZ, integrated power supply, linear encoder for weld by distance, factory base, powered videos

 
2000 watt  

Branson 920M ultrasonic power supply, 2000 watt, 20 kHz

2000 watt power supply, 240/1/60, sold with Branson 921aes welders

 
2000 watt  

Branson 921AES/920M ultrasonic welder, 2000 watt

921aes intelligent actuator, weld by distance, converter & booster, factory base with palm buttons & e-stop, 920M power supply, missing RF cable, powered video

 
2000 watt  

Branson 921aes/920M ultrasonic welder, 2000 watt

921aes intelligent actuator, weld by distance, 920M power supply, 20 kHz, factory base with palm buttons, converter & booster, control & RF cables, powered video

 
3000 watt  

Branson 931 ultrasonic welder, 3000 watt, 20 kHz

931ae actuator, 930BCA power supply, factory base with palm buttons & e-stop, 240/1/60 power, videos under power

 
 

Branson CV-12 orbital vibration welder (sold)

orbital friction welder, 5 hp frequency inverter, 18″ x 18″ hydraulic lift table, Versalogic control, 1995

 
14.3#  

Branson DVW-L vibration welder, s/n – 05R591963

20″ x 15″ part capacity, 180-240 Hz, Vectron 17 hp digital power supply, hydraulic lift table, front & rear service doors, Siemens S7-200 PLC, 2005 – from govt storage

 
1000 watt  

Branson FS-90 fabric welding system (4)

sews or slits fabrics (woven or non-woven) or films 1100 watt Branson 2000BCC power supply converter, gold booster 20″ throat depth 50′/minute feed rate (variable speed motor) 1-50# sealing wheel […]

 
1000 watt  

Branson FS-90 fabric welding system (sold)

fabric welding system (seam welder), 20″ throat, 20 kHz, 910BC power supply,
902R converter & booster, 26″ x 48″ table, 117/1/60

 
48" x 60"  

Branson HH-4840 hot plate (pallet) welder, 07R654547-2

48W” x 62D” x 34″H capacity, 400F-600F aluminum hot plate, servo driven tables, hydraulic press, AB Compactlogix PLC & Panelview 1000, 2007 – SOLD

 
48" x 60"  

Branson HH-4840 hot plate (pallet) welder, horizontal, 07R654547-1

48W” x 62D” x 34″H horizontal hot plate welder, 400F-600F aluminum hot plate, hydraulic, Compactlogix PLC & Panelview 700 HMI, just arrived, 2007 – 2008 (5)

 
48" x 60"  

Branson HH-4840 hot plate welder, s/n – 07R654547-3

48W” x 62D” x 34″H capacity, 400F-600F aluminum hot plate, servo driven tables, hydraulic press, AB Compactlogix PLC & Panelview 1000 HMI, 2007 (1 of 4)

 
48" x 60"  

Branson HH-4840 hot plate welder, s/n – 07R654547-4 (sold)

48W” x 62D” x 34″H capacity, 400F-600F aluminum hot plate, servo driven tables, hydraulic press, AB Compactlogix PLC & Panelview 1000 HMI, 2007 (SOLD)

 
48" x 62"  

Branson HH-4840 hot plate welder, s/n – 08R654547-5

48W” x 62D” x 34″H capacity, 400F-600F aluminum hot plate, servo driven hot plate carrier, hydraulic press, AB Compactlogix PLC & Panelview 1000 HMI, 2008

 
12" x 15"  

Branson HH15 hot plate welder, s/n – 11R774521

12″ x 15″ part size, horizontal plates, 14″ vertical press stroke, floating hot plate, 27″ daylight, AB SLC500 PLC, Quickpanel Jr. HMI, 2011

 
24" x 24"  

Branson HH24A hot plate welder, s/n – 12R801741

24″ x 24″ heat platen size, horizontal, hydraulic, 29″ daylight, 16″ press platen stroke, Allen Bradley SLC5/03 PLC, Proface HMI, 15,302 cycles, new 2012

 
10" x 12"  

Branson HV-12 hot plate welder, s/n – 01R443484-1

10″ x 12″ part size, 12″ x 15″ vertical platens (horizontal movement), 14″ heated platen stroke, AB SLC500 PLC, Quickpanel Jr., 2001 (1 of 3)

 
10" x 12"  

Branson HV-12 hot plate welder, s/n – 01R443484-3

10″ x 12″ part size, 12″ x 15″ vertical platens (horizontal movement), 14″ heated platen stroke, AB SLC500 PLC, 240V, Quickpanel Jr. 2001 (1 of 3)

 
10" x 12"  

Branson HV-12 hot plate welder, vertical platens (3)

10″ x 12″ part size, 12″ x 15″ vertical platens (horizontal movement), 14″ heated platen stroke, AB SLC500 PLC, Quickpanel Jr. interface, 2001 (3)

 
750W  

Branson IRAM 750 watt plastic welding laser, 2011

750W @ 980 nm, (6) 125 watt laser banks, (27) SmartFiber optic cables, 2000X actuator (model 3.25), 3G & 3I controllers (with internal chiller), Lanco conveyor

 
unknown  

Branson LV-38 vibration welder, s/n – 94RLV380084

38” x 19” lift table, Moog valve (hydronamic drive), new 1994, Allen Bradley controls, rebuilt 2003

 
143#  

Branson M624H vibration welder, s/n – 01R455314-1

143# upper tool weight, 52″ x 29″ lift table, 55.9 hp vibration drive, 30 KW M6 weld head, AB SLC5/04 PLC, Xycom 3450 HMI, may do Compactlogix PLC retrofit, 2001

 
142#  

Branson M624H vibration welder, s/n – 04R523558-1

143# upper tool weight, 45.3 hp vibration drive, 52″ x 21″ lift table, AB Compactilogix L24ER PLC, AB Panelview Plus 7 HMI, new 2004, 10/2017 control retrofit

 
142#  

Branson M624H vibration welder, s/n – 04R523558-3

143# upper tool weight, 52″ x 21″ lift table, 45 hp vibration drive, AB Compactlogix L24ER PLC, AB Panelview Plus 7 HMI , new 2004, 10/2017 control retrofit

 
143#  

Branson M624H vibration welder, s/n – 05R580104-2

143# upper tool weight, 52″ x 21″ lift table, 45 hp vibration drive, M6 center drive coils, control retrofit: Micrologix 1400 PLC & Panelview 700 Plus HMI , 2005

 
143#  

Branson M624H-UH vibration welder, control retrofit – 1

143# upper tool weight, 52″ x 21″ lift table, 45 hp vibration drive, center drive coils, Micrologix 1400 or Compactlogix L32E control retrofit, Panelview 700 Plus

 
143#  

Branson M624H-UH vibration welder, s/n – 02R477987-3

143# upper tool weight, 52″ x 21″ lift table, 45 hp vibration drive, M6 center drive coils, control retrofit: Micrologix 1400 PLC & Panelview 700 Plus HMI, 2002

 
77# - 143#  

Branson M624L vibration welder (sold)

52” x 21” lift table, 45 hp Vectron drive, Branson center drive coils, M2 software, 73 cycles total use, 2006

 
8#  

Branson Mini II vibration welder, s/n – 05R566720 (sold)

13.75″ x 9.5″ lift table, 17 hp/12.7 KW Vectron frequency inverter, 8# upper tool weight, Allen Bradley SLC500 PLC, Quickpanel Jr interface, like new condition, 2005

 
8#  

Branson Mini II vibration welder, s/n – 07R656608-1

8# upper tool weight, 7″ x 9″ part capacity, 17 hp frequency inverter, Micrologix PLC, Panelview 600 interface, new 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656610-1

8# upper tool weight, weld by distance, 17 hp Vectron drive, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 2186 cycles, 2007, powered video

 
8#  

Branson Mini II vibration welder, s/n – 07R656610-2 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 445,797 cycles, very clean, see video, 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656610-3 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, only 427 cycles, like new, 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656801-1 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 211,082 cycles, 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656801-3 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 19,847 cycles, excellent, 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656801-4 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, 2102 cycles, like new, 2007

 
8#  

Branson Mini II vibration welder, s/n – 07R656801-5 (sold)

8# upper tool weight, weld by distance, 17 hp frequency inverter, Allen Bradley Micrologix PLC, Panelview 600 touch screen, only 1920 cycles, 2007, (6) identical

 
8#  

Branson Mini II vibration welder, s/n – 07R656801-6 (sold)

8# upper tool weight, 7″ x 9″ part size, 17 hp frequency inverter, Micrologix PLC, Panelview 600 touch screen, weld by distance, like new, 2042 cycles, 2007

 
8#  

Branson Mini-II vibration welder (sold) – 3

13.75″ x 9.5″ lift table (pnuematic), 180-240 Hz, 8# upper tool, 11 KW vibration drive, various PLC & interface, 1997 – 2002 (3)

 
250 watt  

Branson Radiance 3G laser, s/n –

(2) 125 watt laser banks, upper tool with (8) fiber optic bundles, control, 2000X actuator, welds up to 4 lineal inches

 
250 watt  

Branson Radiance laser banks, EDP No. 144-100-552

(6) 130 watt laser banks, 5 x 50 watt, 940 nanometer, closed loop, adjustable laser drive current, (27) fiber optic bundles, 3G & 3I controllers available, new 9/2011

 
2 hp  

Branson SW 200 spin welder (servo driven, orienting)

Apex 2 hp servo drive, 3500 rpm, 3.4″ stroke, 18″ height adjustment, weld by rotation, distance (collapse) or absolute position, very clean, 2005

 
2" diameter  

Branson SW-150 spin welder, s/n – EDP-300-101-109

air powered spindle to 7500 rpm (programmable), 2″ diameter part capacity, 4″ ram stroke, 14″ open height, 8″ height adjustment, bench mount, palm buttons & e-stop, non orienting, like new, 2008

 
2 hp  

Branson SW-200 orienting spin welder, 200CR0307676

2 hp Apex 6154 servo drive, 3.4″ stroke, 18″ height adjustment, orientation to 1 degree, 315# force, Eason 900X interface, powered videos, 2003

 
2 hp  

Branson SW-200 orienting spin welder, 200CR9912533

2 hp Apex 6154 servo drive, 3.4″ stroke, 18″ height adjustment, 1 degree spindle orientation, 315# force, Eason 900X interface, powered video, 1999

 
2 hp  

Branson SW-200 spin welder (sold)

2 hp Apex servo drive with orientation 3.4″ actuator stroke, 18″ height adjustment, factory table with palm buttons, Eason 900X interface for rpm/rpc, 1996 (Powell McGee)

 
 

Branson SW-200 spin welder (sold)

2 hp Apex servo drive, 3.4″ stroke, 18″ height adjustment, weld by rotation (1 degree), distance (collapse) or absolute position, light pharmaceutical use, 2000

 
2 hp  

Branson SW-200 spin welder, s/n – 200CR0210654

mint condition – from storage, 2 hp Apex 6154 servo drive, orientation to 1 degree, 3.5″ stroke, 18″ open height, 315# force, Eason 900X interface, palms & e-stop, 2002

 
2 hp  

Branson SW-200 spin welder, s/n – 200CR0308681

2 hp Apex 6154 servo drive, orientation to 1 degree, rpm control, 3.5″ stroke, 18″ open height, 315# maximum force, Eason 900X interface, vacuum spindle, 2003

 
6.8 hp  

Branson SW-300 spin welder (sold)

6.8 hp servo drive, 250 – 3500 rpm, weld by rotation, collapse or absolute position, 5″ to 32″ spindle to base, 225# force, 6″ color touch screen, 2008, 5629 total cycles

 
45.3 hp  

Branson Ultraschall 45.3 hp (33.8 kW) frequency inverter, 04020549 (sold)

Branson Ultraschall 400-060 vibration drive, input 400/480 volt 3 phase, output: 0-480 volt (also Vectron 42 kVA & 52 kVA frequency inverters)

 
50#  

Branson VW-4 vibration welder, s/n – 95R259214-1

50# upper tool weight, 34″ x 21″ motorized lift table, 23.5 kVA Branson Ultraschall vibration drive, Allen Bradley SLC5/02 PLC & DTAM Plus interface, 1995

 
50#  

Branson VW-4 vibration welder, s/n – 96R-291194

50# upper tool weight, 34″ x 21″ motorized lift table, Commander 5 hp frequency inverter, Allen Bradley SLC5/02 PLC & DTAM Plus interface, 1996

 
50#  

Branson VW-4H Ultra Hy-Line vibration welder, 98R342349

50# upper tool weight, 34″ x 21″ hydraulic lift table, 10 hp frequency inverter, Allen Bradley SLC5/04 PLC, Xycom 9487 interface, weld by distance, 1998 – SOLD

 
35#  

Branson VW-4H vibration welder (sold)

34″ x 21″ lift table, 180-240 Hz, 35# – 50# upper tool, 10 hp vibration drive, Versalogic PLC, Epic interface, 1997

 
35# - 50#  

Branson VW-4H vibration welder, s/n – 01R472163 (sold)

Hy-Line, 34″ x 21″ hydraulic lift table, 50# upper tool weight, Vectron 17 hp vibration drive, weld by distance, GE Versalogic control, Epic inteface, very clean, appears almost new, 2001

 
50#  

Branson VW-4H vibration welder, s/n – 95R1989

50# upper tool weight, Commander 10 hp vibration drive, hydraulic lift table (missing cylinder), Versalogic control, Epic interface, finger actuators, may retrofit control

 
35#  

Branson VW-4L vibration welder (sold)

33″ x 21″ lift table, 180-240 Hz, 35# – 50# upper tool weight, 17 hp vibration drive, Alley Bradley SLC 5/05 PLC, 2003

 
50#  

Branson VW-4L-1 vibration welder, s/n – 04R550287

50# upper tool weight, 34″ x 21″ hydraulic lift table, Vectron 17 hp vibration drive, AB SLC5/03 PLC, Quickpanel Jr. HMI, weld by distance, new 2004

 
 

Branson VW-4L-1 vibration welder, s/n – 06R611651

50″ upper tool weight, 34″ x 21″ hydraulic lift table, Vectron 17 hp vibration drive, AB SLC5/03 PLC, Quickpanel Jr. HMI, weld by distance, light curtain, new 2006

 
50#  

Branson VW-4UH vibration welder, s/n – 04R537733-5

50# upper tool weight, 34″ x 21″ lift table, 17 hp Vectron vibration drive, AB Micrologix 1400 PLC, Panelview 7 Plus HMI, new 2004, 10/2017 control retrofit

 
45# - 80#  

Branson VW-6 (96DVW6) linear vibration welder (sold)

46″ x 21″ lift table (motorized), 40″ x 18″ vibration unit, 10 hp power supply, Allen Bradley SLC5/04 PLC & Panelview 1000, 1996

 
80#  

Branson VW-6 vibration welder (24V control retrofit)

46″ x 21″ hydraulic lift table, 25″ daylight, 15 hp weld head, 25 KW Emerson SK3401 vibration drive, Compactlogix L32E & Panelview 700+ HMI, warranty – SOLD

 
45# - 80#  

Branson VW-6 vibration welder (complete rebuild) (sold)

46” x 21” lift table, 80# upper tool weight, 15 hp head, 2012 complete rebuild (AB Compulogix L32E PLC, Panelview Plus 700 interface, 25 hp Emerson frequency inverter), parts & labor warranty

 
80#  

Branson VW-6 vibration welder, 2016 control retrofit

15 hp weld head, Branson 23 kVA vibration drive, Compactlogix L24ER PLC & I/O, Panelview 700 Plus HMI, new hydraulic pump, tested & videotaped

 
80#  

Branson VW-6 vibration welder, s/n – 96R259934

80# upper tool weight, 46″ x 21″ lift table, (hydraulic), 15 hp weld head, 23.4 hp frequency inverter, DTAM interface, Versalogic control, finger actuators, 1996, very clean

 
80#  

Branson VW-6 vibration welder, s/n – 97R304079

46″ x 21″ lift table (motorized), 15 hp weld head, 15 hp Commander drive, AB SLC-500 PLC, Series 90 controls, DTAM interface, weld by distance, light curtain, new 1997

 
45#  

Branson VW-6H vibration welder (sold)

46″ x 21″ lift table, 180-240 Hz, 45# – 80# upper tool, 10 hp vibration drive, Versalogic PLC, Epic interface, 1997

 
80#  

Branson VW-6H vibration welder, s/n – 97R319254

Hy-Line, 46″ x 21″ hydraulic lift table, 15 hp weld head, Commander 15 hp frequency inverter, Versalogic control, Epic interface, new 1997, refurbished

 
80#  

Branson VW-6H vibration welder, s/n – 99R402059

Hy-Line, excellent, medical backup, Branson Ultraschall 23.5 kVA vibration drive, 15 hp weld head, weld by distance, 46″ x 21″ lift table, calibrated 2014, new 1999

 
80#  

Branson VW-6HL vibration welder, 2017 control retrofit

46″ x 21″ hydraulic lift table, 10 hp weld head, Emerson vibration drive, Micrologix 1400 PLC, Panelview 700 Plus HMI, 2017 retrofit

 
80#  

Branson VW-6HL vibration welder, s/n – 95RVW6HL0480 – retrofit

Hy-Line, 46″ x 21″ hydraulic lift table, 10 hp weld head, Emerson 10 hp frequency inverter, being retrofitted with new control & HMI, new 1995

 
80#  

Branson VW-6L vibration welder, s/n – 97R495288

46″ x 21″ hydraulic lift table, 15 hp weld head, 23.4 hp vibration drive, weld by distance, AB SLC500 PLC, Quickpanel Jr. HMI, palm buttons, 1997

 
45# - 80#  

Branson VW-6UH Ultra Hy-Line vibration welder (sold)

46″ x 21″ hydraulic, 15 hp Commander vibration drive, Allen Bradley SLC5/04 PLC, Xycom touch screen interface, weld by distance, excellent, 1998

 
 

Branson VW-6UHL linear vibration welder, 1999 (sold)

46″ x 21″ lift table with 12″ x 32″ opening 40″ x 18″ vibration unit 25″ vertical clearance 45# upper tool weight (recommended), 80# maximum 20″ table stroke (hydraulic – […]

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 12″ x 32″ open
17hp Vectron drive,
Allen Bradley & Xycom controls,
45# – 80# upper tool weight, 1994

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 10 hp Commander drive, Allen Bradley & Xycom controls, 45# – 80# upper tool weight, 1995

 
45# - 80#  

Branson VW-6UHL vibration welder (sold)

46” x 21” lift table, 10 hp Commander drive, weld by distance, 45# – 80# upper tool weight, excellent, 1996

 
80#  

Branson VW-6UHL vibration welder, s/n – 01R445792 (sold)

46″ x 21″ hydraulic lift table, 80# upper tool weight, 15 hp head, 23.4 hp vibration drive, AB SLC5/04 PLC & AB computer, touch screen, from medical clean room, exc., 2001

 
120#  

Branson VW-8-H2 vibration welder, s/n – 06R613246 (sold)

120# upper tool weight, 58″ x 18″ part capacity, 21″ lift table stroke, Vectron 23.4 hp frequency inverter, weld by distance, AB Compulogix L32 PLC, Panelview Plus 700 interface, H2 software, 2006

 
35# - 50#  

Branson VW90-4 linear vibration welder (sold)

34″ x 21″ motorized lift table
7.5 hp vibration drive, 35# – 50#
tool weight, weld by distance
AB SLC5/02 & Spectrum SOI
new 1992, clean

 
35#  

Branson VW90-4 vibration welder (sold) – 6

34″ x 21″ lift table (mechanical), 180-240 Hz, 35# – 50# upper tool, 5-10 hp Commander drive, DTAM interface, 1992 (6)

 
 

Branson VW90-6 (VW-6) driver coil (sold)

Marelco Power Systems 144-100-106 driver coil 100C, 1 phase for 15 hp Branson head s/n – M-17881

 
45# - 80#  

Branson VW90-6 vibration welder (sold) – 3

46″ x 21″ lift table (mechanical), 180-240 Hz, 45# – 80# upper tool, 7.5 – 10 hp Commander drive, Series 90, 1992 (3)

 
45# - 80#  

Branson VW90-6 vibration welder, s/n – 415983 (sold)

46” x 21” lift table, 23.4 hp Vectron drive, 15 hp weld head, motorized table elevation, Series 90 control, new in 2000

 
45#  

Branson VW90-6 vibration welder, s/n – 415983-2 (sold)

46″ x 21″ lift table (motorized), 23 hp Vectron drive, 15 hp weld head, SLC-500 PLC, Series 90 controls, weld by distance, excellent condition, new 2000

 
80#  

Branson VW90-6 vibration welder, s/n – 99D398976

15 hp weld head, 23 hp vibration drive, weld by distance, 46″ x 21″ motorized lift table, SLC500 PLC, light curtains, Series 90 amplitude & frequency control, line edit, 1999

 
80#  

Branson VW90-6 vibration welder, s/n – VW00045C

46″ x 21″ motorized lift table, 7-1/2 hp vibration drive, Allen Bradley SLC500 PLC & DTAM Plus interface, Series 90 control, light curtain, deep enclosure, 199x

 
1000 watt  

Dukane 1000 watt ultrasonic welder, 20 kHz, remote palm buttons

Ultra 210 actuator with linear encoder, Auto-Trac 20A1000 power supply, UltraCom 43D301 control, video under power

 
1000 watt  

Dukane 1000 watt ultrasonic welder, 20 kHz, sound enclosure

210 actuator, weld by distance, 1000 Auto-Trac power supply, 43C303 UltraCom control,
converter, booster, RF cables, enclosure, palm buttons

 
1000 watt  

Dukane 210 1000 watt ultrasonic welder, s/n – US166224

Dukane 43E255 actuator, Dukane 1000 Auto-Trac power supply, Dukane Ultracom 43C303 control, J6 to J20 cable needs new end, one stack to run 4 welders

 
4000 watt  

Dukane 4000W ultrasonic welder, 15 kHz, 2008

DPC IV controller/power supply, 215 actuator, 21.3″ height, sound enclosure with pneumatic door, finger actuators, e-stop, converters & boosters, new 2008

 
24" x 24"  

Dukane hot plate welder, fully servo driven, US198015

24″ x 24″ part size, 35″ daylight, 26″ x 28″ between 4-posts, vertical rack system, horizontal press platens & hot plate (4-zones), Compactlogix PLC, Panelview 700 Plus, like new (one of four)

 
4.2 hp  

Dukane SVT032R orienting spin welder, s/n – US206599

4.2 hp servo, orientation to .1 degree, 3000 rpm, 21″ vertical, 8″ throat, 6″ stroke, weld by distance, revolutions or time, 587,545 cycles, Dukane recently serviced, 2008

 
4.2 hp  

Dukane SVT032R orienting spin welder, s/n – US213860

4.2 hp servo drive, orientation to .1 degree, 3000 rpm spindle, 21″ vertical, 8″ throat, 6″ stroke, weld by distance, revolutions or time, touch screen, 283,293 cycles, 2009

 
4.3 hp  

Dukane SVT032R orienting spin welder, s/n – US254334

4.2 hp servo drive, orientation to .1 degree, 3000 rpm spindle, 21.3″ vertical, 8″ throat, 6″ stroke, weld by distance, revolutions or time, touch screen, 91.890 cycles, 2013

 
90#  

Dukane VWB-3700 vibration welder (sold)

52″ x 26″ lift table, 200-250Hz, 90# – 150# upper tool, 42 hp vibration drive, AB SLC5/03 PLC, Panelview 600, 457 hours, 2006

 
150#  

Dukane VWB3700 vibration welder, 2 production hours

CE stamp, 150# upper tool weight, 52 x 26 lift table, 42 hp vibration drive, SLC5/03 PLC & Panelview 600 HMI, immaculate condition, videotaped under power

 
82 cubic foot  

Envirotronics EVH-1982-2-12-WC HALT test system, 2012

temperature/humidity/vibration test system, 54″ x 54″ x 42″ chamber, -73C to 177C temperature range, 20% – 95% humidity range, Star 36 pnuematic multi-axial shaker, virtually unused, new 2012, SOLD

 
4 hp  

Extol Vortex Precedence G1 spin welder, s/n – 15938

4 hp servo driven spindle, 0 – 5000 rpm, pneumatic press, 4″ stroke, program approach & press, 20″ work window, 7″ color HMI, height adjustable table, 2013, lab use

 
7.5 ton  

Fluid Chillers AIR7500 7.5 ton chiller, s/n – 082112-741

air cooled, 98,000 btu/hour, 7.5 hp compressor, stainless tank, 59″ x 36″ x 66″ H, 1200# dry weight, fan switch for indoor/outdoor use, new 2012, never run in production

 
14" x 45"  

Forward Technology VH-1445 hot plate welder, s/n – 1105

14″ x 45″ part capacity, vertical platens & hot plate, horizontal movement, hydraulic, Allen Bradley SLC5/03 PLC & Panelview 550 touch, 60,836 cycles, new 2005

 
3" x 20"  

Goodman 3E belt puller & fly cutter, left to right, s/n – 6229

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 1 hp variable frequency drive, 4″ fly cutter with Rota 15 air clutch/brake

 
3" x 20"  

Goodman 3E belt puller & fly cutter, left to right, s/n – 6230

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 1 hp variable frequency drive, fly cutter with Roto Step 15 air clutch & brake

 
3" x 23"  

Goodman 3E belt puller & fly cutter, left to right, s/n – 6303

for plastic extrusion, 3″ x 23″ synchronized belts, 3″ opening, Baldor 1 hp variable frequency drive, 5 hp fly cutter, vacuum clutch & brake (2), air clutch (5)

 
3" x 20"  

Goodman 3E belt puller & fly cutter, right to left, s/n – 6342 (sold)

3″ x 20″ double-sided timing belt, 1 hp synchro-pull drive, 3″ capacity cutter, Durant digital counter, very clean, excellent condition, new 1999

 
3" x 20"  

Goodman 3E belt puller, left to right, s/n – 6164

3″ x 20″ caterpillar (synchro-pull) puller, left to right, double sided belt, 3″ maximum opening, control box, s/n – 6164

 
3" x 20"  

Goodman 3E belt puller, left to right, s/n – 7013

3″ x 20″ belt puller, left to right, double sided belt, 3″ maximum opening, synchro-pull dirve, 1 hp Baldor variable frequency drive, 1 hp Vector motor, no control box, s/n – 7013

 
3" x 20"  

Goodman 3E belt puller, left to right, s/n – 7015 (sold)

3″ x 20″ belt puller, left to right, double sided belt, 3″ maximum opening, synchro-pull dirve, 1 hp Baldor variable frequency drive, 1 hp Vector motor, no control box, s/n – 7015

 
 

Goodman 3E belt puller, parts machine, s/n – 7014

Goodman 3E belt puller, parts machine, s/n – 7014

 
3" x 20"  

Goodman 3E belt puller, right to left, s/n – 7023

for plastic extrusions, 3″ wide belt, 20″ tractor length, 3″ maximum belt opening, Baldor 1 hp vairable frequency drive/Vector 1 hp motor, less controller, 2005

 
3" x 20"  

Goodman 3E belt puller, s/n – 5229

parts machine

 
3" x 20"  

Goodman 3E belt puller, s/n – 5528

 
3" x 20"  

Goodman 3E belt puller, s/n – 5530

3″ x 20″ caterpillar (synchro-pull) puller, left to right, double sided belt, 3″ maximum opening, 1 hp servo motor, control box, s/n – 5530

 
3" x 20"  

Goodman 3E belt puller, s/n – 5670 – vgc

very good condition

 
3" x 20"  

Goodman 3E belt puller, s/n – 6162 – nice

 
3" x 20"  

Goodman 3E belt puller, s/n – 6735 – excellent – bent rear door

 
3" x 20"  

Goodman 3E belt puller, s/n – 6818 – nice

 
3" x 20"  

Goodman 3E belt puller, s/n – 6974

 
3" x 20"  

Goodman 3E belt puller, s/n – 7021 – nice

 
3" x 20"  

Goodman 3E belt puller, s/n – 7022

 
3" x 20"  

Goodman 3E belt puller, s/n – 7023

for plastic extrusion, 3″ belt width & opening, sychronized 20″ double sided belts, Baldor 1 hp frequency drive,

 
3" x 20"  

Goodman 3E belt puller, s/n – 7023

 
3" x 20"  

Goodman 3E belt puller, s/n – 7124

 
3" x 20"  

Goodman 3E belt puller, s/n – 7125

 
3" x 20"  

Goodman 3E belt puller, s/n – 7158

 
3" x 20"  

Goodman 3E puller, s/n – 7126

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, left to right, s/n – 5869

3″ wide belt, 20″ tractor length, 3″ maximum belt opening, 5″ capacity cutter, air clutch, 1 hp variable frequency drive for puller, 199x

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, left to right, s/n – 6047

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 1 hp variable frequency drive, fly cutter with Roto Step 15 air clutch & brake

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, left to right, s/n – 6225

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 1 hp variable frequency drive, fly cutter with Roto Step 15 air clutch & brake

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, left to right, s/n – 6228

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 1 hp variable frequency drive, fly cutter with Roto Step 15 air clutch & brake

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, right to left, s/n – 5482-2

for plastic extrusion, 3″ belt width & opening, synchronized 20″ double sided belts, Baldor 2 hp variable frequency drive, 5″ fly cutter with Vac-U-Torq clutch/brake

 
3" x 20"  

Goodman 3E-20 belt puller & fly cutter, right to left, s/n – 6046 (sold)

3″ wide belt, 20″ tractor length, 3″ maximum belt opening, 5″ capacity cutter, air clutch, 1 hp variable frequency drive for puller, right to left work flow, 199x

 
4" x 30"  

Goodman 4E-30 caterpillar puller, s/n – 7070

4″ belt width, 30″ contact length, 4″ belt opening, 1.5 hp variable speed drive, shaft/bevel gearbox, 500-1000 fpm speeds, line speed control

 
 

Goodman traveling up-cut saw, s/n – 5671

4″ capacity, 9″ saw blade, 2 hp, length control,

 
1.5"  

Killion KN-150 1-1/2″ extruder (sold)

1.5″ extruder, 24:1 L/D, 7 heat zones, 45#/hour, 15 hp, 12″ film blowing die, cooling & texture rolls, excellent

 
150 W  

Leister Laser line beam AT module, run 3.1 hours

(2) Leister AT 150 W line beam modules, new 2011 (unused)

 
150 W  

Leister Novolas Basic AT diode laser, run 3.1 hours

150 W diode laser, 18-95 mm line beam shape, digital/analog I/O, <1 mW pilot laser, water/air cooled, class 4 laser, new 2011 (unused)

 
150 watt  

Leister Novolas WS AT 150W line beam laser

line beam or curtain laser uses mask to weld micro-fluidic or nano- fluidic devices, 150 watt diode, 940 nm, beam shape: 18-95 mm line, 23″ x 17″ door opening, 2011

 
150 watt  

Leister Novolas WS AT 150W line beam laser, s/n – BP42

line beam laser or curtain laser uses mask to weld micro-fluidic or nano- fluidic devices, 150W diode, 940 nm, beam shape: 18-95 mm line, 23″ x 17″ door, 3.1 hours (1)

 
27 mm  

Leistritz MIC27/GL-320 Plastic Extruder (sold)

twin screw from laboratory 500 rpm maximum 12 KW extra screws 53 hours use 1995

 
65 KW  

Lenze EVS-9331-ES frequency inverter (new) (sold)

digital frequency inverter

 
250 watt  

LPKF LQ250-QS plastic welding laser, new 2009

250 watt , galvanometer scanner for laser motion control, Opto laser, TermoTek chiller, part clamping module, Siemens control & HMI , full enclosure, powered video

 
20 ton  

Morgan G-100T 20 ton injection molder, s/n – 7327

4 ounce shot, 8″ x 11″ platens, pnuematic with toggle, digital barrel & nozzle temperature controls, manual or semi-automatic, 1982 (G-55T (2 ounce) also available)

 
20 ton  

Morgan G-55T 20 ton injection molder, s/n – 3090

2 ounce shot, 8″ x 11″ platens, pnuematic with toggle, digital barrel & nozzle temperature controls, manual or semi-automatic, 1981 (G-100T (4 ounce) also available)

 
20 ton  

Morgan G-55T injection molder, s/n – 3143

20 ton, pneumatic toggle lock, 2 ounce shot size, for prototyping or short run production, two zone digital temperature controls, 1985

 
120 ton  

Multiplas VC-SD-120T vertical injection molder (sold)

120 ton, vertical clamp, horizontal injection, two station shuttle, 14.88 oz., touch screen control, 2004

 
40 ton  

Preco 1220-P.40 hydraulic die cutter, s/n – 5916

40 ton hydraulic press, 12″ x 20″ bed, 1/4″ – 4″ stroke, micrometer adjustable (manual or power), in/out feed rollers, knock out table, quick change tooling, light use

 
40 ton  

Preco 1224 40T hydraulic die cutting press, s/n – 6564

40 ton hydraulic press, four post, 24″ x 12″ deep platens, tandem drive infeed & outfeed rollers, 10″ daylight, 10 hp pump, manuals, vision system, new 2016, unused

 
12" x 24"  

Preco 1224 40T hydraulic die cutting press, s/n – 6568

40 ton hydraulic press, four post, 24″ x 12″ deep platens, tandem drive infeed & outfeed rolers, 10″ daylight, 10 hp pump, manuals, vision system, new 2016, unused

 
3000 watt  

Rinco 3000 ultrasonic welder, 3000 watt, 20 kHz

Standard 3000 actuator, weld by distance, ADG20-3000 generator, converter & booster, factory base & column, finger actuators, 230/1/60, new 2007/2008

 
 

robot: Fanuc R-2000iA-210F, 6 axes, articulated, F-76224

210 kg payload, 104″ reach, floor mount (on stand), R-J3iB control, teach pendant, 6871 hours, good brakes, 8 hp/18,000 rpm router (for plastic), new 2006 – SOLD

 
60# - 90#  

Sonics & Materials EH-5055 vibration welder (sold) – 3

48″ x 22″ hydraulic lift table, 180-240 Hz, 60# – 90# upper tool weight, 15 hp vibration drive, Allen Bradley SLC5/05 PLC & Panelview 1000 color touch screen interface, new 2003 & 2004 (3)

 
 

Sonitek TS500 thermal press (staking)

2 probes, 340 watts (each) pnuematic press slide table finger actuators 3 second dwell timer 1 second post cooling  timer 25″ daylight manual  head elevation bench top model: TS Model […]

 
18" x 36"  

TA Systems 36″ x 15″ vertical hot plate welder, s/n – 22040-1

(2) 850F heat zones, hydraulic movement, Vickers controls, part vacuum, Allen Bradley SLC5/01, Quickpanel Jr. interface (missing), missing parts, 1995

 
36" x 15"  

TA Systems 36″ x 15″ vertical hot plate welder, s/n – 94461

(2) 850F heat zones, hydraulic movement, pneumatic clamping, part holding vacuum, Allen Bradley SLC5/01 PLC, Vickers hydraulic controls, 1994, (4) machines

 
36" x 15"  

TA Systems 36″ x 15″ vertical hot plate welder, s/n 22040

(2) 850F heat zones, hydraulic movement, Vickers controls, part vacuum, Allen Bradley SLC5/01, Quickpanel Jr. touch screen interface, 1995, powered video

 
18" x 36"  

TA Systems 36″ x 15″ vertical hot plate welder, s/n – 93095

(2) 850F heat zones, hydraulic movement, pneumatic clamping, part holding vacuum, Allen Bradley SLC5/01 PLC, Vickers hydraulic controls, 1994, (4) machines

 
18" x 36"  

TA Systems 36″ x 15″ vertical hot plate welder, s/n – 94460

(2) 850F heat zones, hydraulic movement, pneumatic clamping, part holding vacuum, Allen Bradley SLC5/01 PLC, Vickers hydraulic controls, 1994

 
4 KW  

Thermex Thermatron KF-42 induction heater (RF generator) (sold)

4 KW 27.12 mHz, (dielectric), high frequency 240/1/60 (4) units, 1996, 2003, 2007

 
31 kVA  

Vectron 31 kVA vibration drive (frequency inverter), 9806351

Branson Ultraschall BRA 400-060 31 kVA input and output (22 KW) 3 x 380/460 volt input, 50/60 Hz 45 amp continuous, 54 am peak part 470 101 060 serial number […]

 
33.6 hp  

Vectron 33.6 hp vibration drive (frequency inverter), s/n – 03080637 (sold)

Vectron Elektronik BRA 400-045 BF2 input: 480/3/60, 45 amp outpout: 33.6 hp, 0-400 Hz, 0-480V 3 phase for Branson M622H vibration welder new 2003  

 
6"  

Vercon Autoweld AW-1 spin welder (sold)

6″ diameter part capacity, 8″ part height, 1-1/2 hp, variable speed, heavy duty

 
unkown  

Vinton (Branson) LVW-7SA vibration welder

38” x 19” lift table, Moog valve (hydronamic drive), new 1993, Allen Bradley SLC5/04 PLC & Panelview 1000 interface, complete rebuild in 2001, stored since 2008

 
 

Vinton LVW-4S vibration welder, s/n – 4062

hydronamic vibration welder, Moog 760Y919A valve, 180-240 Hz frequency range, 28″ x 15″ lift table, palm buttons, light curtain, digital weld control, mint condition

 
unknown  

Vinton LVW-7B vibration welder (sold)

36” x 16” pneumatic lift table, Moog valve (hydronamic drive), new 1992, Allen Bradley SLC150, digital weld control