Dukane 2400 watt (20 kHZ) iQ press system, 2013
20HS240-2Q-P5 generator, LE press system, 43A290 thruster, weld by distance, booster, cables, converter, horn, low cycle count, 240/1/60 electrics, new 2013
20HS240-2Q-P5 generator, LE press system, 43A290 thruster, weld by distance, booster, cables, converter, horn, low cycle count, 240/1/60 electrics, new 2013
DPC IV Plus control/power supply, 43A220 actuator, control cables, converter & booster, weld by distance, from medical laboratory, powered video
iQ-II digital control/generator, LE 43Q220 press/actuator, weld by distance, amplitude adjustment, soft start, touch screen HMI, s/n – 328213, 328227 & 326921, powered videos on request
iQ-II digital control/generator. LE 43Q220 press/actuator, weld by distance, amplitude adjustment, soft start, touch screen HMI, s/n – 328228, 328212 & 326918, powered videos on request
350 watt, 40 kHz, tested under power with hand-held probe
4 heat zones, Watlow controls, Dukane modular temperature control, HA Inds automation, Allen Bradley SLC5/04 PLC, enclosure on casters, finger actuators, work light
4070 power supply, s/n – 165798, DPC III Millenium control, 220 thruster, model 43A340, s/n – 200568, basic welder, no weld by distance, factory base with palms, 2005
24″ x 24″ part size, 35″ daylight, 26″ x 28″ between 4-posts, vertical rack system, horizontal press platens & hot plate (4-zones), Compactlogix PLC, Panelview 700 Plus, like new, 2008
Dukane iQ HP-E 40HP0601H, hand probe and cable, 110 volt, weld by energy or time, trigger by power, powered video, s/n – US362827, new 2018 (2 of 2)
Dukane iQ HP-E 40HP060UH, hand probe and cable, 110 volt, weld by energy or time, manual melt mode, powered video, s/n – US362027, new 2018 (1 of 2)
rougly 500 cycles of use, 750 rpm, geared spindle, was hub mount but have factory base with e-stop & finger actuators, more pictures & powered video soon
hot plate, infrared & hot gas, 3-axis coordinated servos with torque feedback, rapid tool changeover, 16″ x 36″ horizontal platens, very few cycles, 8 second cycle time
29,002 total machine cycles, 90# upper tool weight, 38″ x 18″ lift table, 15 hp Allen Bradley 1336 Plus II vibration drive, SLC5/04 PLC & Panelview 600 touch screen HMI, weld by distance
116,238 cycles, auto-tuned with 125# upper tool, Allen Bradley 1336 Plus 42 hp frequency inverter, 90# – 150# upper tool, 52″ x 26″ lift table, light curtains
CE stamp, 150# upper tool weight, 52 x 26 lift table, 42 hp vibration drive, SLC5/03 PLC & Panelview 600 HMI, immaculate condition, videotaped under power